Suspended lattice ceilings Grilyato attract attention with its unusual appearance, which adds elegance to the premises of various purpose. Similar designs can be found in the design of railway stations, shops, but gradually they become one of the elements of the home interior.
The cellular ceiling Grilyato differs from other types of suspended structures in that it consists of gratings assembled from elements of various textures. It can organically fit into the designed interior due to the extensive color range.
Original slatted ceilings are used in a variety of premises: shopping halls, airports, transport terminals, railway stations, exhibition halls, sports facilities, entertainment facilities.
There are several types of grilyato ceilings.
A distinctive feature is the same squares in the design of the ceiling.
Considering the characteristics of the Grilyato ceiling, prior to installation, prepare the preparation of the draft ceiling:
- completely remove the former finish;
- wash off whitewash;
- check the condition of the surface, if necessary, close up the cracks;
- uneven planes will require additional alignment measures;
- pave the necessary communications;
- around the perimeter of the room, using the level - water or laser - make accurate horizontal marking for placement of the gratings;
- for built-in backlight pull and connect the wires.
Having completed all the preliminary work, proceed to the installation operations.
Starting the installation of the openwork ceiling, it is necessary to accurately calculate where the bearing strips will be fixed, and determine their length. For the selection of the optimal variant, the room is measured, and then the standard dimensions of the slats are selected according to the length and width values, which during installation will require minimal trimming. The most common lengths are 1.8 and 2.4 meters. If they take a size of 2.4 m, then another 1.2 and 0.6 m will be needed in the package.
Suitable lamps for the Grilyato ceiling are selected at a preliminary stage, so that prior to installation, mark their installation sites and place the wires.